Silvertech Industrial(H.K)Ltd.

Showing 11 - 17 of 17, total 2 pages [First] [Previous] [Next] [Last]

bearing dismounting toolset tp 150
Specification: 6 sets of extraction arms (A1¨CA6) ¡ö 2 threaded spindles (SW 19)
Detail: The simatool Twin Puller TP 150 can be used to expertly dismount deep groove ball bearings and radial shaft seals. Bearings with a tight fit on the inner or outer ring can be quickly and reliably dismounted with the help of t...

deep groove ball bearing extractor tool bp61
Specification: ¡ö 6 sets of puller arms ¡ö 2 spindles ¡ö Practical toolcase (3.2 k
Detail: With the extractor tool BP 61, deep groove ball bearings can be removed from the shaft. It is also equally suited for removing bearings from just a shaft. Even sealed bearings can be dismounted once the seal is removed. The h...

ball bearing mounting tool ft33
Specification: Case contents: ¡ö 33 impact rings made of nylon ¡ö 3 aluminum impa
Detail: Incorrect mounting, and especially falsely estimated mounting forces, are responsible for approx. 16% of all premature bearing breakdowns. The ball bearing installation tool FT 33 guarantees the fast, precise and secure instal...

induction heater ih 090
Specification: For rolling bearings weighing up to 150kg
Detail: ¡ö For rolling bearings weighing up to 150kg ¡ö For workpieces with inner diameter of 20 to 400mm ¡ö Also included: 3 yokes, 1 swivel arm, 1 temperature probe, 1 pair of protective gloves ¡ö Available for voltages of 200, ...

induction heater ih 070
Specification: For rolling bearings weighing up to 120kg
Detail: ¡ö For rolling bearings weighing up to 120kg ¡ö For workpieces with inner diameter of 20 to 400mm ¡ö Also included: 3 yokes, 1 temperature probe, 1 pair of protective gloves ¡ö Available for voltages of 100, 115 and 230V ...

induction heater ih 025 volcano
Specification: For workpieces weighing up to 10kg
Detail: ¡ö For workpieces weighing up to 10kg ¡ö For workpieces with a minimum inner diameter of 20mm up to a maximum outer diameter of 160mm ¡ö Also included: 1 temperature probe, 1 pair of protective gloves, 1 carrying case ¡ö A...

induction heater ih070
Specification: 1 box
Detail: Operating voltage: 230V/16A/50HZ/3.7KVA single phase Working limits: inner diameter - Minimum 20mm Max 400mm Thickness Max 145mm Weight Max 80kg Temperature control range: 0 degrees C-250 degrees C, error + + 3 C Maximum ...


Showing 11 - 17 of 17, total 2 pages [First] [Previous] [Next] [Last]
1 2